Full-spectrum protection and superior accessibility make the Camera Base Layer the perfect solution for outdoor photographers. The secure magnetic closure system is optimized for instant camera access and a seam sealed liner converts to full waterproof mode. A strategically placed accessory pocket stores lens caps, cleaning cloths, extra batteries, or hand warmers to sustain camera function in extremely frigid temps.

• FAST ACCESS AND FULL WATERPROOF MODES : Integrated drybag lines the Camera Base Layer. Leave liner unrolled for fast access, or use the drybag snaps to roll and close drybag for rated waterproof protection. Insulative padding protects from bumps and maintains temps.
• INSTANT, ONE HANDED ACCESS : Fast, magnetic latch can be operated with one hand without looking for instant access.
• VERSATILE CARRY OPTIONS : Hypalon reinforced top handle, carabiner, and compatibility with existing camera straps/wristlets offer multiple carry formats.
• CUSTOMIZED FIT : Two straightforward methods of macro and micro adjustment yield a fine-tuned fit for varying camera/lens combinations.
• ADDITIONAL ON BOARD STORAGE : On board zipper pocket on back for lens caps, camera cards, or hand warmers (for maintaining battery function in cold).

Features

• Integrated drybag with fast access and full waterproof modes
• Magnetic latch for instant, one handed access
• Adjustable length for varying camera/lens combinations
• Top carry handle with integrated daisy chain
• Anodized aluminum carabiner
• Compatible with traditional camera straps
• Zipper pocket for lens caps, camera cards, or hand warmers (for maintaining battery function in cold)
• Insulative synthetic padding protects from bumps and maintains temps
• Hypalon™ reinforced anchor points and handle
• Patents Pending

Dimensions

• Weight: 5.5oz (155g)
• Dimensions: 11 x 9 x 0.8 inches without camera inside (28 x 22.9 x 2cm)

Materials

Outer Materials

• 420D nylon outer high wear panels, UTS waterproofing
• 40D Softshell exterior panels, DWR coating

Inner Materials

• 50D ripstop drybag liner, UTS waterproofing, sealed seams
• Hypalon™ rolltop mode on drybag liner
• Insulative padded protection
• 210D bonded nylon thread
• Magnetic Fidlock® latch

Coating Specs

• UTS coating (ultra tear strength): waterproofing and tear strength increase of 30%
• PU coating (polyurethane): durable waterproofing
• DWR coating (durable water repellent): Water beads up and slicks off to deter wetting out

CAMERA BASE LAYER INSTRUCTIONS

Designed for mirrorless camera bodies with multiple lens combinations. Also accomodates most compact DSLRs and point and shoots.

HOW TO MEASURE FOR A GREAT FIT

To ensure a good fit in both waterproof and fast-access modes, we suggest you measure your camera before purchase. Simplily measure from the back of the body to the end of the lens for length and across the body for width.
PLEASE NOTE: The Camera Base Layer does not fit battery grips.

TWO WAYS TO ADJUST FOR A PERFECT FIT

• MACRO ADJUST : Tuck the bottom of the case up inside itself and cinch the drawstring to convert to short mode.
• MICRO ADJUST : Adjust the magnetic buckle up or down for a snugger/looser fit.

TESTED MODELS / LENSES

Below are a few camera types and models we have tested. We recommend meauring your camera with all lenses to make sure it will fit prior to purchase. To pass the fit test the camera must fit completely in the Camera Base Layer, have room to roll the dry bag 3 times, and snap closed.

TESTED MIRRORLESS MODELS

FITS

• Sony A7RIII + 24×70 f/2.8
• Nikon Z6 III + kit lens (All Nikon mirrorless bodies)
• Olympus OM-D Mark IV + Kit lens
• Sony A6100 + Kit
• Fuji XT4 + Kit Lens
• Sony a6 + Kit lens (Smallest recommended size)

DOES NOT FIT

• Canon r6 + 600mm & anything larger
• Nikon z6 III+ 70-200 & anything larger

NOT RECOMMENDED

• Canon R6 + 28-70mm F/2 (Only rolls twice in dry bag)

TESTED DSLR AND POINT & SHOOT MODELS

FITS

• Canon 5d mark IV + Kit Lens
• Nikon D780 + Kit Lens

DOES NOT FIT

• Nikon D850 + Kit
• All larger Canons